Vagbremtechnic Front 2-Piece 362x32mm Disc Upgrade Kit - Vehicles With DB9 Calipers Retrofitted - DI0003

Vagbremtechnic Front 2-Piece 362x32mm Disc Upgrade Kit - Vehicles With DB9 Calipers Retrofitted - DI0003

This disc installation kit comes with everything you need to install this 2 piece 362x32mm brake disc set up, on a PQ35 or MQB platform vehicle, where you will be fitting the Brembo TTRS / DB9 4 piston calipers. Or, you have allready fitted these 4 piston calipers, but running a 340mm single piece disc and wish to upgrade to the 362mm 2 piece discs.

Please note

- Kit part number DI0003 is also the upgrade kit if you have an 8J TTRS and want to upgrade the standard front discs to the VBT 2 piece discs, if you have an 8J TTRS then you can use this listing, or the product advertised specifically for an 8J TTRS in the following link, but both kits are the same / same part number - DI0003 TTRS Listing

- We have given the option on this listing to have braided brake lines included, or not. If you allready have the TTRS/DB9 calipers retrofitted on your vehicle you will likely not need replacement braided brake lines as you will have allready had to replace them to fit the calipers with whatever other disc setup you may be currently running.

- If you are fitting the TTRS/DB9 calipers you have purchased to your vehicle for the first time, in conjunction with this brake disc and caliper kit, then you will require the braided line dropdown (Unless you have allready sourced braided lines to suit) 

The caliper carriers are made from high strength zinc coated steel. The suppled front brake lines have been made to our specifications by HEL Performance, which include stainless steel fittings and are finished in their carbon black sheathing. The 2 piece brake discs are assembled with outer rotors made by AP Racing which are of the highest quality steel and come in either a grooved or drilled. Matched with the lightweight aluminium bells finished anodised in black, this brake disc setup is a floating 2 piece assembly and the float is in the disc bell rather than the disc. Lastly the fitting kit includes bolts that are high tensile M12x1.25 coupled with quality spring washers.

This kit includes...

• 2x Caliper carriers
• 2x 362x32 2 piece front brake discs with a grooved pattern
• 1x Pair of braided front brake lines (If you select them from the dropdown menu!)
• 4x Caliper to carrier bolts
• 4x Spring washers for caliper to carrier bolts

To complete this front brake kit you will need:

• 1x Set of brake pads to suit your driving style
• Brake fluid to flush system when installing