AKS Braided Clutch Line - Audi S1 - AKSBLS12

AKS Braided Clutch Line - Audi S1 - AKSBLS12

Our AKS braided clutch line for the Audi S1 EA888.3 is designed to help reduce "sponge" in the pedal caused by the OEM line expanding. Making this a highly recommended addition to a performance clutch set up due to the slightly heavier pedal.  The braided line removes the factory fitted vibration diaphragm. Removal of this allows fluid to travel directly to the slave cylinder and removes the spongey feel on the first part of the pedal stroke, essentially reducing any delay in the travel of fluid through the line. The braided line can also assist with the feel of higher RPM shifts.

We recommend fitting our braided clutch lines with a billet bleed block at the same time (can be purchased using the drop down above together at a discounted price) The bleed block eliminates the internal restrictor found in the factory plastic bleed block, creating faster, firmer clutch engagement and disengagement. As well as upgrading the plastic OEM part to a far more substantial billet alloy.

We make our braided lines in house, in our workshop to order at AKS. This enables us to provide you the option of  which colour hose you would like to suit your car / engine bay. You can view the variety of colours available using the dropdown menu above.

We have designed and developed all our braided lines on our own shop vehicles / vehicles in our workshop, with perfect measurements and fittings to suit every model, reinforcing the fact you will get a perfect fitting braided line every time from us.

Please feel free to tag us in your pictures online using the tag #aksbraidedline

Please note - 

- This part is only to suit RHD S1 models - If you have a LHD S1, Please contact us before ordering!

- This particular line is only for Audi S1 models - If you have any other vehicle please see our TFSI, GEN 1 TSI or 2.5 TFSI line - Here Or, If you have any other EA888.3 2.0 TSI platform, RHD vehicle you will require the MQB line, click - Here

- Pictures serve as a guideline only, the item may visually differ from the picture seen.

- Braided clutch lines produced before September 2024 will use -4 AN fittings. Braided lines from September 2024 onwards now use M10 fittings.

FAQ'S -

Q - Does the braided line replace both parts of the factory clutch line ?

A - Yes, it does. The AKS braided line goes from the bleed block on the gearbox, to the master cylinder. The idea is to remove the entire factory line including the vibration diaphragm. Not to use the braided line with the diaphragm!

Q - Is installation straight forward ?

A - Yes, as simple as removing the factory parts and reinstalling the new one piece line. Bleeding the system will be required once fitted.

Q - Is the braided line / bleed block just for use on vehicles with performance clutches ?

A - No, you can fit this braided line on an otherwise totally stock vehicle and still notice an improvement, although the improvements will likely be more noticeable on a modified vehicle / where a performance clutch is fitted.

Q - How do i know which braided line i need for my car ?

A - If you are in any doubt, please contact us with which vehicle you have, email - info@akstuning.com, phone - 01234 822324, or via Facebook / Instagram - AKS Tuning.