Revo MQB Platform Complete Brake Kit Upgrade (Front And Rear)
Improves stopping power under any condition

Improves stopping power under any condition
OVERVIEW
The Revo Complete Brake Kit Upgrade is engineered to improve your stopping power in any condition. Whilst stock brakes are perfectly adequate for general driving; the braking system is often overlooked when enhancing a vehicle's performance. The Revo brake kit is made by world-leading brake manufacturer Alcon; utilising over 30years of motorsport braking innovation only the best materials, techniques and processes have been used.
In-depth testing is a key factor in the development of our products; our brake kits have been aggressively tested in a variety of conditions in both road and track scenarios to ensure they meet the constant high stress of track days, sprints and fast road driving. Test kits were installed on our in-house development vehicles along with several vehicles around the world and put through their paces to prove their worth over the stock setup; providing exceptional performance combined with consistency and durability you can rely on, corner after corner, stop after stop.
Made by world leading brake manufacturer Alcon, only the best materials, techniques and processes have been used, with every step of the manufacturing process completed in the UK. Alcon has been at the forefront of motorsport braking innovation for over 30 years.
BENEFITS
- Low Rotational Mass
- Improved Pedal Responsiveness
- Lower Long-term Maintenance Costs
- Superior Heat Dissipation: Less Prone To Fade
- Increased Braking Performance On & Off Track


100 - 0 MPH AVERAGE STOPPING DISTANCE

FRONT CALLIPERS

Our lightweight six-pot calliper is a single-piece aluminium Mono-bloc design. This design has been used to maximise rigidity, pedal feel and overall braking performance. The calliper incorporates a progressive six-piston setup to give great brake balance, and high quality seals increasing resilience to road salts and other corrosive elements.
FRONT DISCS

We use a two-piece floating disc and hat design to efficiently dissipate heat. The friction surface features crescent groves designed to increase bite and remove debris from the pad surface giving the perfect balance between brake feel and longevity. The discs feature internal cooling vanes that draw air from the centre of the disc outward to maximise heat dissipation and minimise heat transfer to the callipers, pads, and brake fluid, which plays an all-important part in providing consistent stopping power for your vehicle.
REAR DISCS

Internal vanes are used to draw air through the centre of the disc outward, allowing the heat to transfer as it passes. The rotation of the discs and vanes play an important role in brake cooling as it acts as a pump to move air. The Revo upgrade consists of a right and left-hand disc to optimise cooling and ensure consistent stopping power for your vehicle.
BRAKE PADS (FRONT AND REAR)

We supply our brake kit with Ferodo DS Performance Pads that offer a consistent pedal feel and fantastic braking performance both from cold and when hot. Combined with low wheel dusting, minimal noise characteristics, and low disc and pad wear rates this is the ideal pad compound for general road and track driving.
BRAKE LINES (FRONT AND REAR)

Our brake kit is supplied with stainless lines; consisting of a PTFE inner and stainless steel braided outer to eliminate the spongy feel of original rubber hoses, provide superior resistance to corrosion, and offer consistent braking performance.
BRAKE FLUID

Our brakes are supplied with Motul Dot 5.1 brake fluid; specifically designed for brakes systems with ABS. This is a long-life synthetic brake fluid with superior boiling point qualities to conventional Dot 3 and 4 spec. fluids.
KIT CONTENTS
- Revo by Alcon Caliper x2 (3.3 Kg Each)
- Revo by Alcon Front Discs x2 (7.66 Kg Each)
- 6061 Aluminium Anodised Bell x2
- Revo by Alcon Rear 310mm Discs x2
- Caliper Bracket
- Revo Stainless Steel Braided Brake Lines (Front and Rear)
- Motul Dot 5.1 Brake Fluid
- Ferodo DS Performance Brake Pads (Front and Rear)
TECHNICAL DOCUMENTS
The following documents are available to view:
FITMENT
Manufacturer | Model | Engine | Year |
---|---|---|---|
Audi | S3 (8v) | 2.0 TFSI | 12 - 19 |
Audi | Q3 (F3) | 40/45 TFSI & 40 TDI | 18 > |
Audi | SQ2 (GA) | 2.0 TFSI | 16 > |
Audi | TTS | 2.0 TFSI | 14 > |
Seat | Leon (5F) | 2.0 TSI | 13 - 19 |
Skoda | Superb (3V) | 2.0 TSI (272/280 PS) | 15 > |
VW | Arteon (3H) | 2.0 TDI (240 PS) | 17 > |
VW | Arteon (3H) | 2.0 TSI (272/280 PS) | 17 > |
VW | Golf VII (5G) | R 2.0 TSI | 13 - 19 |
VW | Golf VII (5G) | Clubsport 2.0 TSI | 16 - 19 |
VW | Golf VII (5G) | Clubsport S 2.0 TSI | 16 - 19 |
VW | Passat (3G) | 2.0 TSI (220/280 PS) | 15 > |
VW | Passat (3G) | 2.0 TDI (240 PS) | 15 > |
VW | Tiguan (AD/BW) | 2.0 TSI (220 PS) | 17 > |
VW | Tiguan (AD/BW) | 2.0 TDI (150/190/240 PS) | 17 > |
Notes:
- Recommended Revo Authorised Dealer fitment only
- Rear Discs: Designed to replace factory part number 5Q0-615-601-E (Supersession(s): 1K0615601N). Please check you have the OE 310x22 rear rotors before purchasing
Please contact your local Revo Authorised Dealer for additional information and availability.
- Braking
- Brake Kits & Adapters
For more in depth information regarding our shipping, returns and refund policies, please refer to our Webstore Terms & Conditions. These can be viewed - Here