Trackslag 3.5" Downpipe - 2.0TFSi Platform - TRKSLGDP

Please Note - The 200 Cell Sports Cat Option Is Currently Unavailable With No ETA On The Catalysts. All Other Options Are Available To Order. This Note Will Be Taken Off When Supply Resumes To Normal!

As of 02/05/25, the decat option is also unavailable for around 2-3 weeks!

Trackslag have been developing 3.5" downpipes for the TFSi/TSi range since 2015. Not only does this downpipe give gains at the top end of the rev range,  it also improves spool, giving a wider power band. These turbos need all the help they can get with heat management, so the larger diameter of this downpipe and the fact that it doesn't need heat wrapping will assist with exhaust gas temperature management.

The unique Trackslag design means that the 3.5" section is longer than on any other downpipe available for the 4WD platform, yet still gives more clearance for the gear selector cables than most 3" downpipes. Gear selector cable position can be fairly random from car to car, be it that they were built that way, or they've been worked on previously (Clutch change?) or the cables have simply sagged. We made this downpipe with enough clearance from the selector cables on a relatively new, low mileage car, but we urge people to use common sense when fitting the downpipe and if necessary, lift the cables.

This downpipe is also available with a silencer option. Depending on your setup, this either eliminate or helps reduce unwanted drone at cruising speeds and reduces exhaust noise. It will not reduce power.

Who should order the silenced version? 

• Anyone who is ordering a Trackslag Cat-back exhaust. Trackslag Cat-back exhausts only have one silencer (the back box) so it will be too loud without the silenced downpipe. 

• Anyone with an aftermarket turbo back system who already finds that their car is too loud/droney.

• Anyone who is noise conscious. The factory downpipe has two catalysts and is only 60mm OD, so it acts as a silencer.

Usual Trackslag standards apply to this downpipe. Designed and manufactured in England, made from European sourced stainless steel under one roof. It's a two piece downpipe joined by a pair of reliable two bolt flanges. We also used an OEM style soft flex to improve durability and reduce vibration. 

Trackslag have terminated the downpipe with straight 3" pipe, making it easier for you to hook up to your OEM, or aftermarket exhaust. They can supply a nice cone reducer for those wishing to keep the standard exhaust, or a straight 3" sleeved length for those with 3" aftermarket exhausts and a 2.75" adapter for those with the Milltek 2.75" system.

If you are buying one of the Trackslag exhausts to go with this downpipe, you will not need an adpater.