Revo Full Air Intake System - Ford Fiesta ST180 / 200 MK7
chevron_left chevron_right

Revo Full Air Intake System - Ford Fiesta ST180 / 200 MK7

The Revo Air Intake System for the Ford Fiesta ST is a high performance upgrade, offering gains in both power and torque over the stock system!

£313.95 (VAT incl.) £313.95 (VAT excl.)



The Revo Air Intake System for the Ford Fiesta ST is a high performance upgrade, offering gains in both power and torque over the stock system.

Initial flow testing of the OEM system highlighted its restrictiveness. The route from airbox to turbo varies in diameter and convolutions in the pipe cause turbulence, slowing airflow to the turbo. The OEM airbox performed better than expected however restricted power towards the top end of the rev range, especially when coupled with Revo Software.

The Revo system is currently the only kit that replaces the rear plastic back-pipe with a one-piece 70mm aluminium pipe, mandrel bent to ensure no internal restrictions. Automotive grade silicone couplers connect the system to a Revo 3 stage foam filter with integrated MAF sensor housing for ease of fitment and correct scaling. The kit comes complete with an integrated heat shield that utilises the OEM cold air feed, sectioning off the foam filter from the hot engine bay by sealing itself when the bonnet is closed.

Revo recommend this upgrade for anyone running Stage 2 and Stage 3 software in order to achieve maximum performance, however Stage 1 has also been optimised to work in conjunction with this Air Intake System upgrade and offers a noticeable intake noise.




  • +8-10WHP & +10 NM Torque
  • Improved Throttle Response
  • Machined MAF Housing
  • Increased Airflow


  • 3 Stage Foam Filter
  • Custom Heatshield
  • 70mm Mandrel Bent Pipe
  • Silcone Hoses
  • Fitting Brackets



The Revo system was tested on a flow bench to highlight the kits efficiency in allowing more air to reach the turbo, quickly and with less restriction. The OEM system reached its maximum potential of 300 cubic feet per minute with a restriction of 759.3 mmWg, compared to the Revo system which was able to flow 460 CFM with a restriction of only 688.5 mmWg. This difference allows the engine to still make power at the top of the rev limit when installed with the Revo kit.



In house hub dyno testing consistently showed a gain of +8-10 WHP and +10 NM Torque over the OEM system, with more power throughout and increased torque towards the top end of the rev range. This intake coupled with Revo software offers a very noticeable change with enhanced throttle response and a sporty intake note.


Ford Fiesta ST Intake
Revo Ford Fiesta ST180 Intake
70mm Mandrel Bent Pipe
Revo Ford Fiesta ST180 Intake
Machined MAF Housing
Revo Ford Fiesta ST180 Intake
CAD Designed
Revo Ford Fiesta ST180 Intake
Silcone Hoses
Revo Ford Fiesta ST180 Intake
Fitting  Brackets
Revo Ford Fiesta ST180 Intake
Custom Heat Shield



The following documents are available to view:



Download the RF032M200100 Revo Fiesta Intake System Fitting Instructions


Data sheet

50 cm
75 cm
40 cm
3 kg
Data sheet
Air Filters / Induction Kits

Shipping & Returns

Returns Policy

Before returning any goods please read all our terms and conditions. AKS Tuning must be informed in writing of any items that you wish to return for credit or exchange within 7 working days commencing the day of delivery. Returns will not be accepted under any circumstance 28 days after delivery.


We ship worldwide. Note that there are restrictions on some products, and some products cannot be shipped to international destinations.

When you place an order outside of the EU, we will estimate shipping and delivery dates for you based on the volumetric weight of your items and the shipping options you choose. Depending on the shipping provider you choose, shipping date estimates may appear on the shipping quotes page.

Please also note that the shipping rates for many items we sell are weight-based. The weight of any such item can be found on its detail page. To reflect the policies of the shipping companies we use, all weights will be rounded up to the next full pound.