AKS Custom Revo 80mm Maf High Flow Air Filter Intake System - 2.0TFSi
This custom intake kit is a labour of love from AKS to all high powered TFSI owners. The kit starts out as a standard TFSI Revo intake kit, we then set to work modifying the kit to suit its new requirements to work with either a larger K04 hybrid or a Garrett G30 / GTX.
The base Revo intake kit features a motorsport-quality-proven, three-layer filter, with an impressive 857cm² surface area supported by galvanised, epoxy-coated mesh ensuring the filter cannot collapse. The filter has a large 180mm external diameter body and a smooth radius aluminium bell mouth specifically designed for optimum airflow from filter to pipe-work. The lightweight aluminium one piece intake has an integral 80mm MAF housing scaled to suit larger injectors for those running 450bhp+.
This kit is specially designed alongside the TTE480 and the Nortech turbo kits. This kit is required for the Norech kit as the supplied Nortech silicone hose is for a 80mm intake kit!
To maximise airspeed the pipe diameter is kept constant through the large radius bends and smoothly tapers to the MAF housing without any stepped joins. The silicone inlet pipe has a relaxed radius bend and is stepped onto the turbo to ensure a smooth transition and to maintain optimum gas speeds. The K04 diverter take-off has been carefully designed to ensure there is no disruption to airflow within the pipe.
The intake features a laser-cut aluminium heat-shield that ensures the filter is well insulated from ambient under-bonnet temps, the shielding is designed to seal against the underneath of the bonnet liner and makes use of the ducting in the factory grill to maximise airflow and prevent heat-soak. The result is a system that offers over 25% less restriction than its closest competitor, allowing your car to breathe as it should do.
Please Note -
This product is a custom item and made in house, please contact us before ordering for current lead times / availability.
Fitment of this intake without mapping to suit will cause the vehicle to run a little rough as the MAF sensor will not be scaled correctly for the larger intake kit. Bear this in mind before fitting / respective to your mapping dates etc.
The metal pipework is coated in the black / grey finish seen in the image on this listing, and for the advertised prices is only available in this colour. However, we can arrange for the pipe to be powdercoated in other colours upon special request, at a further cost. Please contact us via email / messenger about this if you are interested.